DS17 Infineon Tricore Boot Reader / programmer
 from vipprogrammer.com
Features:

Cable connection guide on attachment of software

DS17 Infineon Tricore Boot Reader Support: EDC17/MED17/ME17/MEV17/MEVD17/PCF2.1/SD13/SD14/SD16/SID208/SID807

Free update software via CD

This software is free updated via CD for one year. Once we have new software release, you can contact us for update. It is free to send the new software CD.

Attention: Our hardware only can use our software. DO NOT use other software that is not belong to us, DO NOT update the software online, otherwise hardware will be locked.

DS17 Tricore ECU remapping tool:

Commonly named as bootmode this port is the Infineon pendent to the Motorola/Freescale BDM port. In contrast to the BDM port, whose pins only have this purpose, the bootmode is done over one of the CAN busses of the processor.
 
Because new assembled ECUs are programmed over this port, Bosch has put it on a 14 pin pad array. It looks like the BDM port but works completely different.
 
To put the processor into the bootmode a modification on the printed circuit board is necessary. This modification depends on the type of the processor and so the type of the ECU. In the most simple case one pin of the processor must be connected to ground. Therefore a contact needle with a wire and a tripod is attached to the system.
 
The power is also supplied over the probe, but is spite to the BDM system the voltage is not manually switchable but automatically controlled by the DS17.


Package list:
 
1pc x DS17 Infineon Tricore Boot programmer
1pc x USB Cable
1pc x Power Adapter
4pcsx Adapter and cables