CPM-010 / CPM-100 eMMC Gang Programmer eMMC Flash Memory 

1 to 4 eMMC / eMCP Gang Programmer for Manual Production Line : CPM-010

1 to 8 eMMC / eMCP Gang Programmer for Manual Production Line : CPM-100

Features:
 

* 1x Master + 8 (or 4)x Target Independent e-MMC/eMCP sockets.
* Supports e-MMC BOOT-1/2, General Purpose-1/2/3/4, and User Data Area Partitions as well as EXT_CSD register settings copy and verify operation.
* Supports MMCA 5.0 compatible e-MMC/eMCP devices.
* Supports e-MMC 4-bit mode working.
* Copy/Verification operation in Partition / Auto / File / Mirror / User / AutoScan mode.
* On-the-fly checksum generation during verify operation.
* Provides EXT_CSD setting checksum info.
* Supports enabling SANITIZE register setting function for MMCA 4.5 e-MMC.
* Supports boot re-size function with e-MMC equipped with boot re-size function.
* 2x RS232 interface for industrial platform connection.
* Replaceable e-MMC / eMCP device socket module is available.
* Equipped with 1 SD card socket module for firmware update requirement and log recording function.
* Equipped with operation LOG recording function (on SD card socket) to save all operation process into LOG file for future study or analyze use.
* Equipped with RTC unit for providing operation LOG detail time info.
* Equipped with Keypad lock function to prevent settings being changed during operation.

Specification:
 

* Power Requirements:    AC 100-240V,50 / 60Hz,0.5A
* Card Slots:    MMCA, 5.0 compatible (SDR50) ; Master x 1, Target x 8
SD 2.0 compatible ; Firmware update/LOG saving use x 1
(Supports SD≦32GB with FAT16/FAT32 file format)
* Dimensions:    L 300mm x W 252mm x H 70mm
* Weight:    ≒ 2920 g
* Display:    16x2 Backlit LCD
    
Package List:

• RS232 DE9 Female x 1 (for connecting to controller unit)

• RS232 DE9 Male x 1 (for connecting to controlled unit)

• Power Connector x 1